As a gravity separation equipment, beneficiation shaker has been widely used for the separation of placer gold and other minerals, mainly for gold or coal preparation. The beneficiation shaker can make the ore particles move in different directions according to their density and particle size, and fan out along the diagonal from the ore feeding tank, and discharge them successively along the edge of the bed. The ore discharge line is very long, which can produce a variety of products with different quality, such as concentrate, secondary concentrate, medium concentrate and tailings. As a gravity separation equipment, beneficiation shaker has been widely used for the separation of placer gold and other minerals, mainly for gold or coal preparation.

6S FRP shaker has the advantages of high rich ore ratio, high separation efficiency, simple operation, easy maintenance and easy stroke adjustment. When the cross slope and stroke are changed, the bed operation balance can still be maintained. The spring is placed in the tank, the structure is compact, and the concentrate and tailings can be obtained in turn. The bed surface is the working surface of sorting. There are trapezoidal and rhombic shapes. Trapezoidal bed surface is almost adopted in China, which has the advantage of easy configuration. The triangular non ore belt on the trapezoidal bed surface is cut off and connected to the lower tailings side to form a rhombic bed surface, which can effectively make use of the separation surface and prolong the separation time. It is widely used in foreign coal preparation shakers.

The following describes the precautions for using the beneficiation shaker:

1. When using the shaker, the stroke times must be selected according to the selected other technical conditions.

2. When using the shaker, pay attention to keep the head of the bed clean to prevent unnecessary wear of parts due to the penetration of mineral sand into the head of the bed.

3. After a certain period of use, when the sliding bearing is naturally worn, the sliding bearing shall be replaced in time according to the degree of wear.

4. Zqsn5-5-5 material is used for the sliding bearing system at the head of the machine. Although it is processed, the lubricating oil in the box shall be ensured to prevent the lubricating bearing from being worn due to lack of oil.