The dressing shaker is used correctly. The dressing shaker is widely used to separate tin, tungsten, gold, silver, lead, zinc, tantalum, niobium, chromium, iron, manganese, ferrotitanium and coal.
The application of shaking table has a history of nearly one hundred years. At the beginning, the asymmetric reciprocating motion of bed surface was caused by impact. So, what should be the correct use method of beneficiation shaker?
Discussion on the correct use method of beneficiation shaker:
1. Adjust the slope adjustment hand wheel to change the cross slope of the bed, adjust the size of flushing water and the position of water distribution valve, and change the flow rate and distribution of flushing water film to obtain a neat and developed concentrate belt.
2. Check whether the connecting screw is loose, whether the pull rod position is appropriate, whether the spring is too loose or broken, whether the shaking or sliding surface is in good contact, and whether the bed surface is in contact with non shaking parts. The cause of abnormal sound can be found and eliminated.
3. If the surface is damaged, resin filler wear-resistant agent can be prepared for repair.
4. Adjust the tightness of the spring and adjust the improper position of the four support points. Correct the mismatched stroke stroke system. Correct the deflection at the connection of the pull rod. The bed runout can be removed.
5. Adjust the sand valve and rising water of the front grading box or adjust the ore separator to control the ore feeding amount and ore feeding concentration. Adjust the ore feeding and make-up water can also adjust the ore feeding concentration.
6. The rocker obtains the target stroke by changing the position of the elbow seat by adjusting the stroke hand wheel: ys type adjusts the stroke by turning the stroke adjusting screw rod and changing the position of the T-head and connecting fork on the rocker arm. Change the motor pulley to adjust the punching times.
7. When the moving parts at the head of the beneficiation shaker are worn too much, they should be replaced, and the ore tank and water tank should be firm to prevent loosening.
8. During ore shutdown, the bed surface shall be flushed to avoid oxidation and scaling of impurities. If there is scaling, it shall be removed.
The correct use method of beneficiation shaker will be shared with you today. If you have any supplement or questions, Hengchang mining machine manufacturer will answer them online for you! Shaking table is a kind of gravity beneficiation equipment. Materials are mainly sorted according to density on the bed surface with longitudinal reciprocating differential motion and bed bars.
