Structural principle and application characteristics of a new 6S beneficiation shaker
The new 6S beneficiation shaker consists of a steel frame, a bed surface main body, a foot supporting the shaker, a slope adjusting mechanism and a shaker with a reciprocating driving device. The key difference between the 6S shaker and the ordinary shaker is that the inclined strip area on the bed surface is added; The smooth area of the bed surface is reduced; The inclined bar has a certain climbing angle; The change of the longitudinal slope of the bed itself; Changes in cross-sectional area, shape and bed surface material. The corresponding operating technical parameters have also been changed. In principle, different technical parameters are selected according to different objects.
Working principle of the new 6S beneficiation shaker: when the slurry is fed in, the inclined strip section forces the ore particles to climb against the inclined water flow caused by the incoming strip in the longitudinal movement, increasing the crawling speed difference and deviation angle difference of light and heavy ore particles; The parallel strip area makes the concentrate belt flat, thin and uniform and discharged in time. "Two inclined and two straight" bed strip improves the separation conditions and can significantly improve the treatment effect and recovery under the control of certain separation indexes. Especially in dealing with the phenomenon of "sand running" and insufficient specific gravity difference, the effect is better than that of straight groove.
The can be used in various stages of sorting operations such as roughing and cleaning. During sorting operation, the selection of straight trough shaker, single wave shaker or double wave shaker shall also be determined according to the nature of ore itself, such as ore specific gravity, difference in specific gravity of light and heavy ore particles, ore particle size, etc. At present, the wide application shows that the waveform shaker is better than the straight slot shaker in dealing with the phenomenon of "sand running" and sorting some refractory ore. It is an upgrading with better sorting effect than the ordinary 6-s shaker. The new 6S shaker is mainly used for waveform shaker, and is widely used in the roughing and beneficiation of ore with particle size of 3-0.019mm in vein ore or placer concentrator of tungsten, tin, lead, zinc, gold, silver, tantalum, niobium, monazite, zircon, ilmenite and other minerals.
The new 6S mineral processing shaker has large processing capacity; High beneficiation recovery; Wide adaptability, especially the concentrate zone is relatively stable. During beneficiation, the concentrate, middling and tailings are clearly divided. When the feed concentration, flow and ore quantity change, the beneficiation condition is stable, so the operation and management are convenient.
